Onkyo TX-NR696 7.2ch AV Receiver

Onkyo TX-NR696 7.2 Channel AV Receiver delivers reference surround sound - theatre like experience with THX® Certified Select™ and power of 175 Watts per channel to fill medium to large home theatre. The TX-NR696 supports 3D sound formats including Dolby Atmos, DTS:X, Dolby Atmos Height Virtualiser and DTS Virtual:X. It supports various ways to enjoy music from wireless streaming to multi-room audio. It features AccuEQ Room Acoustic Calibration to optimised your speakers to deliver the best performance suitable to the listening environment, and also AccuReflex for 3D height channel sound speaker.

Key Features

AMPLIFIER FEATURES

• 175 W/Ch (6 Ω, 1 kHz, 10% THD, 1 channel driven, 100W/Ch @ 8 Ohms)
• THX Certified Select certified Dynamic Audio Amplification
• Custom High-Current Low-Noise Power Transformer
• Large custom-made audio power capacitors
• Non-phase-shift amp topology with discrete output stage
• New dual-transistor amp output stages (L/R/C) doubles instantaneous current output for stunning dynamics and bass impact
• Strengthened power-supply line for high-current dynamics
• Refined HDMI grounds, short signal paths reduce noise
• SoC board remote from audio paths to reduce noise
• High-current drive handles 4-ohm speaker loads
• High-grade AKM (AK4458) 384 kHz/32-bit multichannel D/A conversion

CONNECTION TERMINALS

• 7 HDMI inputs (1 front), 2 outputs (Main [ARC], Sub/Zone 2)
• 2 digital audio inputs (optical and coaxial, assignable)
• 4 analog RCA inputs (assignable)
• 3.5 mm mini-stereo analog input (front)
• 1 phono input with built-in MM equalizer for turntable • 3.5 mm setup mic input for AccuEQ (front)
• 6.35 mm headphone jack (front)
• 2 subwoofer pre-outs
• Zone 2/Zone B line-out/Front pre-out (analog RCA)
• 7 screw-type speaker posts
• Ethernet terminal for network connection and IP control

Dimensions (W x H x D) 435 x 173.5 x 379.5 mm

Weight 10.0 kg